SHORT NECK KIT by American Suspension

$0.00

AMERICAN SUSPENSION WELD IN SLIP FIT NECK AND TREES, TO FIT 2014 AND UP 26" WHEEL


 #S26/14


$1,499.00



 

 

 



PRODUCT DESCRIPTION



The new American Suspension Weld in Short Neck Kit lets you put a 26” wheel on your bagger and keep the long low look.  The American Suspension Kit fits all 2014-Up Harley Davidson Touring Models.  The complete kit utilizes the same American Suspension geometry you have come to know and trust for precise handling.  The neck allows clearance for 4 inches of suspension travel on a 26” wheel while.  The steering geometry works perfect and the true trail is nearly identical to stock.  The Short Neck uses oversize bearings and stem to retain strength. The Short Neck is machined from a solid block of steel using a sophisticated new manufacturing capability.  The one piece billet steel look makes the Short Neck look like it would be right at home on an F-15.  The Short Neck not only looks great, but eliminates all the manufacturing errors inherent in complex weldments.  This is done to insure your project bike will handle great due to perfect steering geometry.


 


 The Short Neck is not just pretty, its built solid from start to finish.  


  


The Slip Fit Short Neck kit Features….


 


1)     Fits 2014-UP Harley Davidson Touring models


2)     Allows the use of a 26” wheel


3)     Retains zirc grease fitting for easy maintenance


4)     Retains stock steering lock, with closed bottom for maximum security


5)     No need to modify the neck to be used with MACH8 inverted performance forks.


6)     Clean billet look, makes your bike “Show perfect” without extensive clean up work


7)     One piece machined instead of complex weldment insure accuracy in design, and precision steering.


8)     Complete Kit includes Weld in Neck, Trees, Lower Bearing, Upper bearing race, Fork leg adapters with air fittings.


9)     Kit uses American Suspension short neck trees, which feature 10 pinch bolts clamping the legs, race style bearing adjustment, tire clearing arch, pressed and clamped solid stem, and machined in place fairing mounts for easy installation.


10) Special fork tube adapters are included to allow solid clamping of the legs, and features use it if you need it air ports for air lowering kits.


11) Patent pending steering stops allow the use of most all nacelles without cutting.


12)  The package also includes hidden bolt handlebar riser mounting kit.


13)  Special packages available to include Air Pistons, Lower Legs and fork covers


14)  EZ weld full beveled edges.  All the edges are beveled where you weld in the neck to allow good penetration and a perfect weld




AS WELD IN SLIP FIT NECK AND TREES, TO FIT 2009-2013 AND 30" WHEEL


 #S30/09


$1,499.00


 

 

 



PRODUCT DESCRIPTION



The new American Suspension Weld in Short Neck Kit lets you put a 30” wheel on your bagger and keep the long low look.  The American Suspension Kit fits all 2009-2013 Harley Davidson Touring Models.  The complete kit utilizes the same American Suspension geometry you have come to know and trust for precise handling.  The 4-1/4 long neck allows clearance for 4 inches of suspension travel on a 30” wheel while only raising the neck an 1-3/4 up.  The steering geometry works perfect and the true trail is nearly identical to stock.  The Short Neck uses oversize bearings and stem to retain strength. The Short Neck is machined from a solid block of steel using a sophisticated new manufacturing capability.  The one piece billet steel look makes the Short Neck look like it would be right at home on an F-15.  The Short Neck not only looks great, but eliminates all the manufacturing errors inherent in complex weldments.  This is done to insure your project bike will handle great due to perfect steering geometry.


 


 The Short Neck is not just pretty, its built solid from start to finish.  


  


The Slip Fit Short Neck kit Features….


 


1)     Fits 2009-2013 Harley Davidson Touring models


2)     Allows the use of a 30” wheel


3)     Retains zirc grease fitting for easy maintenance


4)     Retains stock steering lock, with closed bottom for maximum security


5)     No need to modify the neck to be used with B-17B inverted performance forks.


6)     Clean billet look, makes your bike “Show perfect” without extensive clean up work


7)     One piece machined instead of complex weldment insure accuracy in design, and precision steering.


8)     Complete Kit includes Weld in Neck, Trees, Lower Bearing, Upper bearing race, Fork leg adapters with air fittings.


9)     Kit uses American Suspension short neck trees, which feature 10 pinch bolts clamping the legs, race style bearing adjustment, tire clearing arch, pressed and clamped solid stem, and machined in place fairing mounts for easy installation.


10) Special fork tube adapters are included to allow solid clamping of the legs, and features use it if you need it air ports for air lowering kits.


11) Patent pending steering stops allow the use of most all nacelles without cutting.


12)  The package also includes hidden bolt handlebar riser mounting kit.


13)  Special packages available to include Air Pistons, Lower Legs and fork covers


14)  EZ weld full beveled edges.  All the edges are beveled where you weld in the neck to allow good penetration and a perfect weld.




 


AS WELD IN SLIP FIT NECK AND TREES, TO FIT ON 1997-2008 26" WHEEL


 #S26/08


$1,499.00


 

 

 



PRODUCT DESCRIPTION



The new American Suspension Weld in Short Neck Kit lets you put a 26” wheel on your bagger and keep the long low look.  The American Suspension Kit fits all 1997-2008 Harley Davidson Touring Models.  The complete kit utilizes the same American Suspension geometry you have come to know and trust for precise handling.  The neck allows clearance for 4 inches of suspension travel on a 26” wheel while only raising the neck an 1-3/4 up.  The steering geometry works perfect and the true trail is nearly identical to stock.  The Short Neck uses oversize bearings and stem to retain strength. The Short Neck is machined from a solid block of steel using a sophisticated new manufacturing capability.  The one piece billet steel look makes the Short Neck look like it would be right at home on an F-15.  The Short Neck not only looks great, but eliminates all the manufacturing errors inherent in complex weldments.  This is done to insure your project bike will handle great due to perfect steering geometry.


 The Short Neck is not just pretty, its built solid from start to finish.  


 The Slip Fit Short Neck kit Features….


1)     Fits 1997-2008 Harley Davidson Touring models


2)     Allows the use of a 26” wheel


3)     Retains zirc grease fitting for easy maintenance


4)     Retains stock steering lock, with closed bottom for maximum security


5)     No need to modify the neck to be used with B-17B inverted performance forks.


6)     Clean billet look, makes your bike “Show perfect” without extensive clean up work


7)     One piece machined instead of complex weldment insure accuracy in design, and precision steering.


8)     Complete Kit includes Weld in Neck, Trees, Lower Bearing, Upper bearing race, Fork leg adapters with air fittings.


9)     Kit uses American Suspension short neck trees, which feature 10 pinch bolts clamping the legs, race style bearing adjustment, tire clearing arch, pressed and clamped solid stem, and machined in place fairing mounts for easy installation.


10) Special fork tube adapters are included to allow solid clamping of the legs, and features use it if you need it air ports for air lowering kits.


11) Patent pending steering stops allow the use of most all nacelles without cutting.


12)  The package also includes hidden bolt handlebar riser mounting kit.


13)  Special packages available to include Air Pistons, Lower Legs and fork covers


14)  EZ weld full beveled edges.  All the edges are beveled where you weld in the neck to allow good penetration and a perfect weld.




 


SLIP FIT SHORT NECK FOR 26" WHEEL FITS 09-14 HARLEY DAVIDSON TOURING


 


$799.00


 

 

 



PRODUCT DESCRIPTION



The new American Suspension Weld in Slip Fit Short Neck Kit lets you put a 26” wheel on your Bagger and keep the long low look.  


This fits all 2009-2014 Harley Davidson Touring Models.  


    FOR WELD IN NECK ONLY


The complete kit utilizes the same American Suspension geometry you have come to know and trust for precise handling.  


The 4-1/4 long neck allows clearance for 4 inches of suspension travel on a 26” wheel while only raising the neck an 1-3/4 up.  


The steering geometry works perfect and the true trail is nearly identical to stock.  


The SN73 uses oversize bearings and stem to retain strength. 


The SN73 is machined from a solid block of steel using a sophisticated new manufacturing capability.  


The one piece billet steel look makes the SN73 look like it would be right at home on an F-15.  


The SN73 not only looks great, but eliminates all the manufacturing errors inherit in complex weldments.  This is done to insure your project bike will handle great due to perfect steering geometry.


 


 The SN73 is not just pretty, its built solid from start to finish.  


  


SN73W Features….


 


1)     Fits 2009-2014 Harley Davidson Touring models


2)     Allows the use of a 26” wheel


3)     Retains zirc grease fitting for easy maintenance


4)     Retains stock steering lock, with closed bottom for maximum security


5)     Clean billet look, makes your bike “Show perfect” without extensive clean up work


6)     One pieces machined instead of complex weldment insure accuracy in design, and precision steering.


7)    Sold Separately, this neck uses American Suspension short neck trees, which feature 10 pinch bolts clamping the legs, race style bearing adjustment, tire clearing arch, pressed and clamped solid stem, and machined in place fairing mounts for easy installation.


8) Patent pending steering stops allow the use of most all nacelles without cutting.


9)Special packages available to include Air Pistons, Lower Legs and fork covers


10)In Stock for immediate delivery.


11)EZ weld full beveled edges.  All the edges are beveled where you weld in the neck to allow good penetration and a perfect weld.




 


SLIP FIT SHORT NECK FOR 30 INCH WHEEL FITS 09-14 HARLEY DAVIDSON TOURING


 


$799.00


 

 

 



PRODUCT DESCRIPTION



The new American Suspension Weld in Slip Fit Short Neck Kit lets you put a 30” wheel on your Bagger and keep the long low look.  


This fits all 2009-2014 Harley Davidson Touring Models.  


    FOR WELD IN NECK ONLY


The complete kit utilizes the same American Suspension geometry you have come to know and trust for precise handling.  


The 4-1/4 long neck allows clearance for 4 inches of suspension travel on a 30 inch wheel while only raising the neck an 1-3/4 up.  


The steering geometry works perfect and the true trail is nearly identical to stock.  


The SN73 uses oversize bearings and stem to retain strength. 


The SN73 is machined from a solid block of steel using a sophisticated new manufacturing capability.  


The one piece billet steel look makes the SN73 look like it would be right at home on an F-15.  


The SN73 not only looks great, but eliminates all the manufacturing errors inherit in complex weldments.  This is done to insure your project bike will handle great due to perfect steering geometry.


 


 The SN73 is not just pretty, its built solid from start to finish.  


  


SN73W Features….


 


1)     Fits 2009-2014 Harley Davidson Touring models


2)     Allows the use of a 30 inch wheel


3)     Retains zirc grease fitting for easy maintenance


4)     Retains stock steering lock, with closed bottom for maximum security


5)     Clean billet look, makes your bike “Show perfect” without extensive clean up work


6)     One pieces machined instead of complex weldment insure accuracy in design, and precision steering.


7)    Sold Separately, this neck uses American Suspension short neck trees, which feature 10 pinch bolts clamping the legs, race style bearing adjustment, tire clearing arch, pressed and clamped solid stem, and machined in place fairing mounts for easy installation.


8) Patent pending steering stops allow the use of most all nacelles without cutting.


9)Special packages available to include Air Pistons, Lower Legs and fork covers


10)In Stock for immediate delivery.


11)EZ weld full beveled edges.  All the edges are beveled where you weld in the neck to allow good penetration and a perfect weld.


  




 


WELD IN NECK (TUBE ONLY) AND TREES,


 


$949.99


 

 

 



PRODUCT DESCRIPTION



Use our Grand Slam kit if you want to build a layframe Bagger or if you have your own neck extension.  Comes with steel neck tub and triple tree kit. 





 




WELD IN SLIP FIT NECK AND TREES, TO FIT 2008-2000 30" WHEEL


 


$1,499.00


 

 

 



PRODUCT DESCRIPTION



weld in slip fit Neck and Trees, to fit 2008-2000 30" Wheel




 


WELD IN SLIP FIT NECK AND TREES, TO FIT 2009-2013 AND UP 26" WHEEL


 


$1,499.00


 

 

 



PRODUCT DESCRIPTION



The new American Suspension Weld in Short Neck Kit lets you put a 26” wheel on your bagger and keep the long low look.  The American Suspension Kit fits all 2009-2013 Harley Davidson Touring Models.  The complete kit utilizes the same American Suspension geometry you have come to know and trust for precise handling.  The neck allows clearance for 4 inches of suspension travel on a 26” wheel while keeping the neck height in stock location  The steering geometry works perfect and the true trail is nearly identical to stock.  The Short Neck uses oversize bearings and stem to retain strength. The Short Neck is machined from a solid block of steel using a sophisticated new manufacturing capability.  The one piece billet steel look makes the Short Neck look like it would be right at home on an F-15.  The Short Neck not only looks great, but eliminates all the manufacturing errors inherent in complex weldments.  This is done to insure your project bike will handle great due to perfect steering geometry.


 


 The Short Neck is not just pretty, its built solid from start to finish.  


  


The Slip Fit Short Neck kit Features….


 


1)     Fits 2009-2013 Harley Davidson Touring models


2)     Allows the use of a 26” wheel


3)     Retains zirc grease fitting for easy maintenance


4)     Retains stock steering lock, with closed bottom for maximum security


5)     No need to modify the neck to be used with B-17B inverted performance forks.


6)     Clean billet look, makes your bike “Show perfect” without extensive clean up work


7)     One piece machined instead of complex weldment insure accuracy in design, and precision steering.


8)     Complete Kit includes Weld in Neck, Trees, Lower Bearing, Upper bearing race, Fork leg adapters with air fittings.


9)     Kit uses American Suspension short neck trees, which feature 10 pinch bolts clamping the legs, race style bearing adjustment, tire clearing arch, pressed and clamped solid stem, and machined in place fairing mounts for easy installation.


10) Special fork tube adapters are included to allow solid clamping of the legs, and features use it if you need it air ports for air lowering kits.


11) Patent pending steering stops allow the use of most all nacelles without cutting.


12)  The package also includes hidden bolt handlebar riser mounting kit.


13)  Special packages available to include Air Pistons, Lower Legs and fork covers


14)  EZ weld full beveled edges.  All the edges are beveled where you weld in the neck to allow good penetration and a perfect weld.


 





 

























SHORT NECK KIT by American Suspension

We have the new Short Neck Kit from American Suspension.  It is machined from one piece of billet steel and has a slip fit for easy installation. When useds with American Suspension Short Neck Trees, you have the best looking, best riding big wheel bagger conversion out there. 

With this kit you can run the 26 inch wheel or the 30 inch wheel and keep the stock trail. This Kit will fit 1997-2016 Harley-Davidson Touring Models. 

Additional Information: SHORT NECK KIT by American Suspension

Free Shipping No
Brands We Sell American Susp

Write Your Own Review

You're reviewing: SHORT NECK KIT by American Suspension

Use spaces to separate tags. Use single quotes (') for phrases.

Our Products

Newsletter sign up

Want to keep up to date with all our latest news and information?

Enter your email below to be added to our mailing list.